Before implementing the most ambitious plans to redo your basement, it is worth solving some issues, in particular: “How much to finish a basement in Utah?”. Also, before placing engineering equipment under the house, it is worth consulting with specialists.
Engineering systems in the basement
Before placing engineering equipment in the basement, it is necessary to bring the room into compliance with the requirements necessary for its operation.
Regardless of the final purpose of the room, good ventilation should be made in it. For this purpose, a ventilation duct is equipped, to which, if necessary, a forced ventilation system is connected.
Photo by Point3D Commercial Imaging Ltd. on Unsplash
The project of a private house may provide for the laying of sewerage under the overlap of the first floor. Waste water from the basement is removed using special pumping equipment. When installing the equipment, carefully monitor the work process. Otherwise, there may be a breakdown of communications or an unpleasant noise from the pump in the basement.
Materials and principles of finishing
Before starting the finishing work, it is necessary to waterproof the basement and insulate it. Moisture entering the basement has a destructive effect on the structure of the house and contributes to the appearance of mold. In general, the use of moisture-resistant materials is recommended when finishing the basement.
Photo by Intricate Explorer on Unsplash
The floor, ceiling and walls should be decorated only after thorough cleaning and drying of the room. Of course, you can paint over the mold-covered walls, but in this case, the basement decoration will not last long. Before you start finishing work, you should take care of protecting the room from water, frost. Therefore, the very finishing of the basement of the house begins with waterproofing and insulation, as well as the establishment of all communications.
In solving all the issues outlined above, you should consult with experts in the basement finish area.
